Home | REVIEWS (page 4)

REVIEWS

Gear Guide and Review

ZUKIWORLD Reviews: Calmini’ 6″ Combo Lift Kit part 3.

  Project TRICKER-KICKER Calmini’s 6″ Combo Lift Kit,  There’s More Then Just Clearance To Gain. -Junior Continued. —Next, install the new tubular control arms. (TIP; make certain the steering arms are above the control arm on each side during install. If not, you’ll have to remove the arm and reinstall it as we did. You’ll understand.) Here you see the …

Read More »

ZUKIWORLD Reviews: Calmini’ 6″ Combo Lift Kit part 2.

Project TRICKER-KICKER Calmini’s 6″ Combo Lift Kit,  There’s More Then Just Clearance To Gain. -Junior Continued. —Next unbolt the gas tank’s filler hose from the body.  Cutting and extending of the filler hose and replacement of the vent tube is require. Calmini provides the necessary hardware for this. Gas tank Filler hose W/extension added e-brake cable Here we’re loosening the …

Read More »

ZUKIWORLD Reviews: Calmini’ 6″ Combo Lift Kit part 4.

  Project TRICKER-KICKER Calmini’s 6″ Combo Lift Kit,  There’s More Then Just Clearance To Gain. -Junior Continued. —Once the body lift was complete we turned our attention to the suspension components. We elected to lift the vehicle and support it by the frame allowing the suspension to freely hang. remove stock upper arm install new arm reconnect spring   Now …

Read More »

ZUKIWORLD Reviews: CALMINI Sidekick Front Bumper

  CALMINI Sidekick Front Bumper Installation and Review of Calmini’s Sidekick Front Bumper Editor: Eric Bewley BAKERSFIELD, CA -As Suzuki Sidekicks become more and more popular and their owners begin to traverse more advanced terrain exploring farther into the backcountry, stronger and more capable components are needed. CALMINI manufacturing from Bakersfield California has recognized and embraced the Sidekick adventurer and …

Read More »

ZUKIWORLD Reviews: Sky Off-Road Design Samurai Light Tabs

  SKY Manufacturing Installation and Review of Sky Manufacturing’s Samurai Light Tabs. Editor: Eric Bewley Springfield, OR -Sky Manufacturing and Off-road Design has provided Samurai enthusiasts with another fine product. Samurai Light tabs are designed to take the place of the factory windshield brackets allowing the owner to attach two off-road lights in this optimal place. We received the windshield …

Read More »

ZUKIWORLD Reviews: SKY’S OFFROAD DESIGN – Hi-Steer Kit for Samura

SKY’S OFFROAD DESIGN We Installed and Tested Sky’s Hi-Steer Kit for Samurai. Editor/Photo: Eric Bewley SPRINGFIELD, OR. —Sky’s Offroad Design has been turning out some great steering products for all sorts of off-road vehicles. We had a chance to install and evaluate their Hi-Steer kit for a Dana 44 equipped Samurai. There was some prep work involved in this application …

Read More »

ZUKIWORLD Reviews: Sky Manufacturing Traction Bar

  “Traction Satisfaction” By Eric Bewley Installing a Sky Manufacturing Traction Bar After months and months of struggling with various spring combinations trying to get my SPOA, Spring Over Axle, lifted Samurai to work right, I gave up and started looking for a traction bar that would work for me. The answer came from hours of ‘surfing the net’ looking …

Read More »